This code provides practical guidance on safety requirements for the amenity tree industry. It is intended as a guide to the public and private sectors in meeting. This publication is currently un...

The purpose of this Industry Model procedure is to document the legislative and operational requirements for the inspection of metering/ electrical panels at commercial and domestic premises to determ...

This guide will help you comply with the OHS Regulation 2001 by providing guidance on who can 'test and tag' plug-in electrical equipment at a place of work.  ...

This safety alert is published following investigation of an incident that occurred to the operator of a concrete-placing boom after they received a serious electric shock when the boom came into cont...

These guidelines will help you comply with the legislative requirements in clause 64 of the Occupational Health and Safety Regulation 2001 (the OHS Regulation 2001) by taking you through the steps of ...

This checklist will help contractors engaged in building and construction work understand and apply the provisions described in the Code of practice: Electrical practices for construction work as ...

The aim of this code of practice is to provide the construction industry with a set of safety measures applicable to electrical practices for temporary electrical installations and electrical applianc...

This code provide guidance to prevent injury to persons engaged in excavation work on construction work sties as defined on page 53. ...

The purpose of this guide is to provide owners, operators and persons involved in setting up and attending amusement devices, information on some of the common electrical safety issues they should be ...

Injury statistics show that a high proportion of workers under the age of 24 will be injured during their first year at work. Some of these injuries will result in permanent disability, ongoing pain a...

This document is designed to provide guidelines for individuals/employers to assist in developing agreed safe work practices.  The NSW OHS Regulation 2001 places an obligation on the employer and...

This Hazard Profile is a tool to assist in the identification of occupational health and safety (OHS) hazards in relation to electrical hazards on-site. ...

The aim of this code of practice is to protect the health and safety of electrical workers. It will help employers and self-employed persons decide on appropriate measures to eliminate or control the ...

The NSW Electrical Industry Asbestos Awareness Committee (EIAAC) provides this procedure as an Industry Model. The procedure is based on a health risk assessment which included asbestos air monitoring...

A ladder is used for gaining access to areas above or below the ground, or other levels not provided with permanent access. It is important to realise that there are limits to the safe use of a ladder...

This safety alert replaces a previous safety alert issued in 2005 and has been revised following the recent death of a plumber who was electrocuted while installing a new section of copper water...

This approved industry code of practice should be followed unless there is an alternative course of action, which achieves the same or better standard of health and safety in the workplace....

This position paper outlines how WorkCover will apply and interpret the term ‘neutral’, as defined in the NSW Code of practice for low voltage electrical work. The requirements in this position paper ...

The aim of this code of practice is to protect the health and safety of persons from the risks arising when the are working near overhead power lines and associated electrical apparatus....

This Guideline is for employers, employees, contractors, subcontractors and other parties involved in construction work near underground assets. This Guideline will assist employers decide appropriate...