The Rural Workers Accommodation Act 1969 was amended to remove prescriptive requirements and to provide for the approval of the Code of practice by the Minister, from 1 July 2006.  The Co...

This Industry Code of Practice is for employers, self-employed persons and employees with practical advice on the provision of a minimum standard of amenities ...

This Code of Practice provides guidance to prevent injury and illness to persons engaged in Cash-in-Transit (CIT) operations or other persons for whose safety there are obligations under Part 2 of the...

This Code of Practice provides guidance to prevent injury and illness to persons engaged in, and persons affected by, the collection of domestic waste in New South Wales.  It also provides practi...

This Industry Code of Practice has been produced by WorkCover NSW to provide employers, self-employed and employees with practical advice on preventing injury to persons engaged in erecting and disman...

The object of this code of practice is to adopt practices recommended in the National Code of Practice for the Preparation of Material Safety Data Sheets, issued by the National Occupational Health an...

The codes have been adopted by WorkCover as approved industry Codes of Practice under Part 4, section 43 of the Occupational Health and Safety Act 2000. ...

Code of Practice: Cutting and Drilling Concrete and Other Masonry Products (PDF format - 110 Kb) Commenced 1 March 1997 Code of Practice: Electrical Practices for Construction Work. (P...

Code of Practice: Control of Workplace Hazardous Substances. (PDF format - 535Kb) Commenced 12 July 1996. Government Gazette No. 61 of 17 May 1996. Code of Practice: Preparation of...

Code of Practice for Cash in Transit. (PDF format - 458Kb) Commenced 9 March 2003. Code of Practice for Noise Management and Protection of Hearing at Work. (PDF format - 57Kb) Comm...

The code is part of a regulatory package designed to deal with the safe use of hazardous substances in the workplace so as to minimise the risk of disease and injury due to the exposure of hazardous s...

This code of practice provides practical guidance to employers and workers on the suitable methods to control risks in blood-borne viruses. For further information see Blood-Borne Viruses FAQs...

This Industry Code of Practice has been produced by the WorkCover Authority of NSW to provide employers, self-employed persons and employees with practical advice on the use of saws and drills and ass...

The aim of this code of practice is to provide the construction industry with a set of safety measures applicable to electrical practices for temporary electrical installations and electrical applianc...

This code provides guidance to prevent injury to persons engaged in excavation work on construction work sites. ...

This industry Code of Practice has been produced by the WorkCover Authority of New South Wales to provide industry with a set of minimum safety requirements applicable to facade retention. It sets out...

This code of practice provides advice to employers, self-employed persons, suppliers and employees on meeting the labelling requirements of the Occupational Health and Safety (Hazardous Substances) Re...

The aim of this code of practice is to protect the health and safety of electrical workers. It will help employers and self-employed persons decide on appropriate measures to eliminate or control the ...

The National code of practice for the prevention of musculoskeletal disorders from performing manual tasks at work 2007 provides comprehensive guidance in applying the risk management process for manu...

This Industry Code of Practice has been produced by the WorkCover Authority of NSW to provide employers, self-employed persons and employees with practical advice on safe mono-strand post-tensio...

The aim of this code of practice is to assist employers in deciding appropriate measures to prevent risks to workers and other people on construction sites where moving plant is used. ...

This code of practice has been published by the WorkCover Authority of NSW to assist employers, self-employed persons and employees to develop and implement practices for noise management and protecti...

The OHS Act provides choices on how consultation can occur. An OHS Committee, OHS Representative or Other Agreed Arrangements may be established. The legislation allows choice to enable the employer a...

This national code of practice provides guidance to persons working in the general and residential construction sectors on the types of induction training that may be needed to provide construction wo...

This industry code of practice has been produced by the WorkCover Authority of NSW to provide industry with practical guidance on the design, supply, installation and use of overhead protective struct...

The National code of practice for the prevention of occupational overuse syndrome was adopted as an approved industry code of practice in NSW from 2 March 1996.  ...

This Code of Practice assists employers in their obligations under the Occupational Health and Safety Regulation 2001 to identify any foreseeable hazards that may arise in the workplace and to as...

The object of this Code of Practice is to adopt the National Code and Guidance Note and thereby provide practical guidance to employers, self-employed persons and employees to ensure the health and sa...

This industry code of practice has been produced by the WorkCover Authority of New South Wales to provide industry with a set of minimum requirements for the safe handling and storage of enzymatic det...

This code of practice will promote safe and healthy practices in the use, storage and transport of agricultural chemicals by end users. It will assist users to minimise detrimental effects to human he...

This code of practice is intended to help prevent injuries in the use of bulk storage containers and flatbed storage. It outlines typical hazards associated with such storage, and describes means of e...

The NSW WorkCover Authority has prepared this Code of Practice as a guide for persons working in the pest control industry, green keeping and other industries. ...

This Code of Practice is to adopt the National Code and provide practical guidance to employers, self-employed persons and employees to meet the requirements of the Occupational Health and Safety...

This Code of Practice aims to adopt the National Code and provide practical guidance to employers, self-employed persons and employees in the identification of health hazards, the evaluation...

This Industry Code of Practice provides employers, self employed persons and employees with practical advice on safe work on roofs for commercial and industrial buildings. ...

This Industry Code of Practice has been produced by the WorkCover Authority of NSW to provide employers, self-employed persons and employees with practical advice on preventing injury to persons engag...

This code of practice will help designers, manufacturers, importers and suppliers comply with their obligations under the Occupational Health and Safety Act 2000 and the Occupational Health and Safety...

This code of practice provides guidance to prevent injury to persons engaged in the manual or mechanical felling of trees and related activities....

This code of practice is designed as an aid in the prevention of injury to persons employed in NSW sawmills. The code covers the sawmilling process of all timber species used in the NSW Timber Industr...

This code of practice provides comprehensive practical guidance on the safe storage and handling of substances and articles classified as dangerous goods, (excluding explosives, infectious substances ...

This approved industry code of practice should be followed unless there is an alternative course of action, which achieves the same or better standard of health and safety in the workplace. ...

This code of practice gives practical advice on how to decide on appropriate measures to eliminate or control the OHS risks that may arise in the course of tunnel construction....

The aim of this code of practice is to assist employers in deciding on appropriate measures to eliminate or control the risks to employees who work in hot or cold environments. ...

The aim of this code of practice is to protect the health and safety of persons from the risks arising when the are working near overhead power lines and associated electrical apparatus....

The aim of this code of practice is to assist employers in deciding on appropriate amenities for the welfare of their employees. It provides practical advice on implementing the requirements of the Oc...